If PIN protection is activated, a PIN prompt
appears when you select Export Data
.
X
To enter the PIN: turn the controller and
press ¬ to confirm.
PIN protection is deactivated.
X
To select Memory Card, Media Inter‐
face 1 or Media Interface 2: turn and
press the controller.
This function exports all the data to the
selected disc.
A window appears with the message that
the data has been exported.
You can export address data, bookmarks,
system settings that you have made and radio
station lists, for example.
Personal music files in the MEDIA REGISTER
cannot be saved and imported again using
this function.
Mercedes-Benz is not liable for any loss of
data.
Reset function
You can reset COMAND to the factory set-
tings. Amongst other things, this will delete all
personal COMAND data. These include, for
example:
R
Station presets
R
Entries in the destination memory
R
Entries in the list of previous destinations in
the navigation system
R
Entries in the address book
R
Authorized telephone
In addition, an activated PIN protection,
which you have used to protect your data
against unwanted export, will be deactivated.
Resetting is recommended before selling or
transferring ownership of your vehicle, for
example.
Data on the internal hard drive, e.g. music
files in the MEDIA REGISTER, will be deleted.
Mercedes-Benz is not liable for any loss of
data.
X
Press Vehicle in the main function bar.
The vehicle menu is displayed.
X
To select System Settings: slide 6,
turn and press the controller to confirm.
A menu appears.
X
To select Reset: turn and press the con-
troller.
A prompt appears asking whether you wish
to reset.
X
Select Yes or No.
If you select No
the process is canceled.
If you select Yes
a prompt will appear again
asking whether you really wish to reset.
X
Select Yes or No.
If you select Yes
a message will be shown.
COMAND is reset to the factory settings
and restarted.
If you select No
the process is canceled.
Reset function
47
System settings
Z
To Next Page
Loading...
