Mercedes-Benz Command - Time Settings; Date

Switching the display on/off
X
Press Vehicle in the main function bar.
The vehicle menu is displayed.
X
To select Display Off: slide 6, turn and
press the controller to confirm.
The display goes out.
X
To switch the display on again: press the
controller.
Time settings
General information
COMAND can automatically set the time and
date.
The following navigation system functions
require the time, time zone and summer and
standard time to be set correctly in order to
work properly:
R
route guidance on routes with time-
dependent traffic guidance
R
calculation of expected time of arrival
Switching automatic time on and off
The Automatic Time Settings function is
used to activate or deactivate the automatic
setting of the time and date. This function is
activated when the vehicle leaves the factory.
X
Press Vehicle in the main function bar.
The vehicle menu is displayed.
X
To select Time: slide 6, turn and press
the controller to confirm.
A menu appears.
X
To select Automatic Time Settings:
press the controller.
X
To switch the function on O or off ª:
press the controller.
Setting the time zone
To set the time zone, the Automatic Time
Settings function must be activated.
X
Press Vehicle in the main function bar.
The vehicle menu is displayed.
X
To select Time: slide 6, turn and press
the controller to confirm.
A menu appears.
X
To select Time Zone:: turn and press the
controller.
A list of countries appears. The # dot indi-
cates the current setting.
X
Select the country you are currently in by
turning and pressing the controller.
The country is accepted.
A time zone list may also be displayed,
depending on the country selected.
X
To select the desired time zone: turn and
press the controller.
The time zone is accepted.
A list of available options for setting sum-
mer time appears (
Y page 39).
Setting summer and standard time
You can use the Daylight Saving Time
menu to set automatic summer time change-
over or switch the summer time setting on or
off. The changeover to summer time advan-
ces the time by one hour.
The Daylight Saving Time
menu or the
Automatic
option is not available in all coun-
tries.
X
Press Vehicle in the main function bar.
The vehicle menu is displayed.
X
To select Time: slide 6, turn and press
the controller to confirm.
A menu appears.
X
To select Daylight Saving Time: turn
and press the controller.
A list of available options for setting sum-
mer time appears.
X
To select Automatic, On or Off: turn and
press the controller.
Time settings
39
System settings
Z