Mercedes-Benz Command - Navigation

drive program (see the vehicle Operator's
Manual).
A window appears after a short while.
X
To confirm Adjust: press the controller.
The Individual Configuration
menu
for setting the drive program appears.
X
To select Drive, Suspension, Transmis‐
sion, Exhaust System or ESP: turn and
press the controller.
The menu symbol, text and image show the
selected setting.
Displaying vehicle data
i
There may be fewer displays depending
on your vehicle's equipment.
X
Press Vehicle in the main function bar.
The vehicle menu is displayed.
X
To select DYNAMIC SELECT: turn and press
the controller.
The Individual Configuration
, Vehi‐
cle Data and Engine Data menus
appear.
X
Select Vehicle Data.
Updates of the following data are dis-
played:
R
Road type analogous to the selected
drive program
R
G-force display of longitudinal and lateral
acceleration
R
Accelerator and brake pedal activity
R
Activity of the spring struts
R
Wheel angle
R
Inactive overrun mode animation
The G-force display is not available in all of the
drive programs.
Daytime or night-time view is shown depend-
ing on the automatic light sensor.
Displaying engine data
i
There may be fewer displays depending
on your vehicle's equipment.
X
Press Vehicle in the main function bar.
The vehicle menu is displayed.
X
To select DYNAMIC SELECT: turn and press
the controller.
The Individual Configuration
, Vehi‐
cle Data and Engine Data menus
appear.
X
Select Engine Data.
The following current data is displayed:
R
Engine output
R
Engine torque
R
Transmission fluid temperature
R
Engine oil temperature
Setting options
You can choose from the following settings
for the drive:
R Race
C Comfort
S Sport
S+ Sport +
You can make the following settings for the
suspension:
C Comfort
S Sport
S+ Sport +
You can choose from the following settings
for the transmission:
D Automatic
M Manual
DYNAMIC SELECT
55
Vehicle functions
Z