Mercedes-Benz Command - Bluetooth eg settings

Activating WiFi
X
To select Vehicle from the main function
bar: turn and press the controller.
X
To switch to the menu bar: slide 6 the
controller.
X
Select System Settings.
The System Settings
menu is displayed.
X
Select WiFi.
The WiFi menu appears.
X
Select Activate.
X
Press the controller.
Switch the connection on O or off ª,
depending on the previous setting.
Connecting the device
General notes
i
The exact WiFi connection procedure may
vary depending on the device to be con-
nected. Follow the instructions that are
shown in the display. Further information
can be found on the operating instructions
for the device you wish to connect.
Connecting a device via WPS PIN
Prerequisite:
For this type of connection, the device to be
connected must support "Connect using WPS
PIN".
X
To select Vehicle from the main function
bar: turn and press the controller.
X
To switch to the menu bar: slide 6 the
controller.
X
Select System Settings.
The System Settings
menu is displayed.
X
Select WiFi.
The WiFi menu appears.
X
Select Connect via WPS PIN.
X
Select the vehicle from the device to be
connected and "Connect using WPS PIN".
The vehicle is displayed with the SSID MB
WLAN XXXXX.
The device to be connected generates a
PIN.
X
This PIN is also entered on COMAND.
Connecting the device by pressing a
button (push button)
42
WiFi
System settings