Micromeritics ACCUPYC II 1345 - Page 124

8 Selected Reports
Field or Button
Description
Show +/-
[checkbox]
Select to place two horizontal lines on the graph. The top line will be
placed at a point relative to the average and standard deviation of the
data. The bottom line will be placed at the point entered in the adjacent
field.
Show Average
[checkbox]
Select to show the average of all cycles. A horizontal line is placed at
the average point for the cycles.
Show Min
Show Max
[checkbox]
Horizontal lines are placed at the entered limits.
Show Reference
[checkbox]
Select to show a horizontal line placed at a reference point specified in
the adjacent field.
X-Axis [checkbox]
Variables available for the x-axis.
Y-Axis [checkbox]
Variables available for the y-axis.
For fields and buttons not listed in this table, see Common Fields and But-
tons on page3 - 2.
Density Volume vs Cycle Number Trend Plot (continued)
8 - 4
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021