Micromeritics ACCUPYC II 1345 User Manual

GLOVE BOX
Provides for analysis of samples in which a controlled environment is required.
Options
Description
Configuration
n 1 cm
3
sample chamber
n 10 cm
3
sample chamber
n 100 cm
3
sample chamber
n 350 cm
3
sample chamber
n 2000 cm
3
sample chamber
n 100 cm
3
high pressure sample chamber
This unit consists of two separate modules. The controller is placed outside the glove box, while the
analysis module is placed inside the glove box. Up to six analysis modules may be placed in the glove
box, all controlled by one external control module.
TEMPERATURE CONTROLLED MODULE
Provides for the attachment of an external circulating bath.
Options
Description
Configuration
n 10 cm
3
sample chamber
n 100 cm
3
sample chamber
The temperature controlled unit is specifically designed for temperature sensitive materials. This unit
is ideally suited for laboratories in which ambient temperature varies during normal work hours, or in
which subambient cooling is required.
TECMODULE
n About the TEC Module on page1 - 4
n Specifications for AccuPyc II TEC on page1 - 15
n TEC Module on page13 - 1
Configuration Options
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021
1 - 9

Micromeritics ACCUPYC II 1345 Specifications

General

Brand	Micromeritics
Model	ACCUPYC II 1345
Category	Measuring Instruments
Language	English