128 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
Chapter 4
Navigation Windows
Security - LDAP Configuration Window
Use this window to enable LDAP, and configure LDAP settings and servers. Up to 5
LDAP servers can be configured.See Figure 4-46.
The SyncServer S6xx software supports remote authentication using RADIUS,
TACACS+ and LDAP servers. The authentication process with multiple remote
authentication servers is different among the RADIUS, TACACS+ and LADP
servers.
For RADIUS and LDAP, the additional servers are used for "fail over" purpose. They
are used only when the prior server in the list is not reachable. The first reachable
server is going to authenticate the username and password. The result of the
authentication is the result for the entire remote authentication, meaning that it is not
going to use the additional servers to authenticate further. If the authentication
succeeds, the user is allowed to login to the SyncServer. If the authentication fails,
the SyncServer continues its local authentication using the local users list.
Note:
Search base name: 1-199 characters
binddn: 1-63 characters
bindpw: 1-63 characters
Search filter: 1-199 characters
Login attribute: 1-63 characters
Note: LDAP is designed to be used with LAN1. Do not configure a
LDAP server address in a subnet used by the other LAN ports (LAN2
- LAN6).
To Next Page
Loading...
