Microsemi SyncServer S650 - 10 Gbe Connections; Ethernet Connections; Recommended and Supported SFP+ (10 Gbe) Transceivers

58 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
Chapter 2 Installing
Signal Connections
Figure 2-12. Ethernet Connections
10 GbE Connections
The two SFP+ ports are only available with the 10 GbE option. These SFP+ ports
are equipped with hardware timestamping that supports NTP, PTP, and NTP
Reflector operations. These ports are ideal for interoperability with 10 GbE
switches. SFP modules supported are limited to 10 GbE speeds only, See Table 2-3
for a list or recommended and supported SFP+ transceivers.
Figure 2-13. 10 GbE Connections
Table 2-3. Recommended and Supported SFP+ (10GbE) Transceivers
Vendor
Mode Item Code or P/N
ALU multi-mode 10GBASE-SR,
PN: 3HE04824AA
ALU single mode 10GBASE-LR,
PN: 3HE04823AA
Finisar multi-mode PN: FTLX8573D3BTL
Finisar multi-mode PN: FTLX8574D3BCL
Finisar single mode PN: FTLX1471D3BCL
D-Link multi-mode 10GBASE-SR,
PN: DEM-431XT-DD
Cisco multi-mode SFP-10G-SR