098-00720-000 Revision D1 – February, 2018 SyncServer 600 Series User’s Guide 181
Chapter 6 Provisioning
Managing the User Access List
Deleting A User
Use the following methods to delete a user from the system access list. Do not
delete the default username and password.
Changing a User’s Password
Use the following procedure to change a user’s password.
Note:
Passwords must be at least 8 characters (maximum of 34
characters), and need to include at least 1 upper-case, 1
lower-case, 1 number, and 1 special character.
The following characters are not allowed: (', ", <, >, &, ), $
Note: The “admin” account cannot be deleted or renamed.
Table 6-3. Deleting a User
Method Steps Notes
Web Interface Security > Users
1. Select the user to be deleted with User
dropdown box
2. Click the Delete Selected User box.
3. Click the Apply button.
CLI n/a
Front Panel n/a
Note:
Passwords must be at least 8 characters (maximum of 34
characters), and need to include at least 1 upper-case, 1
lower-case, 1 number, and 1 special character.
The following characters are not allowed: & < > ' "
To Next Page
Loading...
