Microsemi SyncServer S650 - System Notification Messages

098-00720-000 Revision D1 – February, 2018 SyncServer 600 Series User’s Guide 253
Appendix A System Messages
System Notification Messages
 Severity = Notify | Minor | Major | Critical (defined by severity code)
 MsgText = (see tables)
System Notification Messages
Table A-1 provides a list of system notification messages. These messages are
logged and sent to a remote syslog server if configured. These messages can also
be sent via email . Alarms can also generate an SNMP trap.
Notes: Transitory Events represent transitions that have no "Set and
Clear" behavior, such as when the first lock occurs after power-up
(see "first normal-track since powerup" alarm).
Table A-1. System Notification Messages
Description
Event
ID
Msg
Level
Trans-
itory
MsgText Corrective Action
Enter/exit
time/freq
warmup
1 Minor No Entered time/frequency
warm-up state
Transitioned out of
time/frequency warm-up
state
No action required
No action required
Enter/exit
time/freq
freerun
2 Minor No Entered time/frequency
free-run state
Transitioned out of
time/frequency free-run
state
No action required
No action required
Enter/exit
time/freq
fast-track
3 Notify No Entered time/frequency
fast-track state
Transitioned out of
time/frequency fast-track
state
No action required
No action required