Microsemi SyncServer S650 - Whats New in this Guide; Where to Find Answers to Product and Document Questions

24 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
How to Use This Guide
Where to Find Answers to Product and Document Questions
Where to Find Answers to Product and Document
Questions
For additional information about the products described in this guide, please contact
your Microsemi representative or your local sales office. You can also contact us on
the web at www.microsemi.com/ftdsupport.
When this manual is updated the updated version will be available for downloading
from Microsemi’s internet web site. Manuals are provided in PDF format for ease of
use. After downloading, you can view the manual on a computer or print it using
Adobe Acrobat Reader.
Manual updates are available at:
www.microsemi.com/ftdsupport
What’s New In This Guide
The following corrections and additions have been made to the SyncServer S6x0
User’s Guide with Rev. D1:
 Added section with 10 GbE Input/Output Connections to Chapter 1.
 Added Table 2-3 with recommended and supported SFP+ (10 GbE)
Transceivers.
 Added details about Dynamic Position Mode to References - Reference GNSS
Window.
 Updated Figure 4-16, screen image for Network > SNMP page,
 Updated Figure 4-28, screen image for Timing > Input Control page,
 Added specifications for Operating Altitude and Storage Altitude to Table B-2.
 Added Timing Accuracy for Inputs with Table B-12.
 Added details to Compliance & Certifications section in Appendix B about
Voluntary Control council for Interference by Information Technology Equipment
(VCCI) and VCCI-A.
 Added voltage range to the power specifications in Table B-3
 Added details about PTP to Timing Port Rules, on page 332.
 Added procedure to Add NTP Server Association using Autokey Authentication.