206 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
Chapter 6 Provisioning
Provisioning NTP Security
Provisioning NTP Security
NTPd Symmetric Keys
Generate the current keys.
Upload a file containing keys from a local PC drive to the SyncServer.
Download the SyncServer's current key file to a local PC drive.
Use the GENERATE button to clear previous keys and generate new ones.
Table 6-13. Modify Existing NTP Association
Method Steps
Web Interface NTP > NTPd Config
1. Select the NTP Association that is to be modified from the list.
2. Change the Role, if desired, with dropdown box as either Server,
Peer, or Broadcast.
3. Change the IP address or DNS name, if desired, of the NTP
association.
4. Change the Port with dropdown box, if desired, LAN1, LAN2,
LAN3, LAN4, LAN5 or LAN6.
5. Click the “Prefer” checkbox, if desired, to select or deselect this
as a prefer association.
6. Change the Burst setting, if desired, with the dropdown box as
N/A, Burst, iBurst, or Both.
7. Change the MinPoll value, if desired, with the dropdown box.
8. Change the Symmetric value, if desired, with the dropdown box
9. Change the MaxPoll value, if desired, with the dropdown box.
10. Click the Save button to save changes.
11. Click the Restart button to make any changes take effect.
CLI n/a
Front Panel n/a
To Next Page
Loading...
