Microsemi SyncServer S650 - Network - SNMP Window

90 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
Chapter 4
Navigation Windows
The SNMP engine ID is displayed for the user's convenience. The SNMP MIB files
for use with the SyncServer can be downloaded on this page.
Figure 4-16. Network - SNMP Window
Network - SNMP Trap Configuration
Use this window add or edit SNMP trap recipients
The following parameters can be configured:
 IP Address - up to 10 trap managers can be added
 Trap Version: v2 or v3
 User / Community, 1-32 characters
 Authentication Phrase (v3 only), 1-99 characters
 Privacy Phrase (v3 only, privacy uses AES128), 1-99 characters
 Authentication Encryption: MD5 or SHA (v3 only)