232 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
Chapter 6 Provisioning
Provisioning for SNMP
Adding and Removing SNMP v3 Users
SNMPv3 provides additional security features not available in SNMPv2c. In addition
to the functions of SNMPv2c, SNMPv3 allows user and trapuser levels that are
based on authentication and privacy settings. The authentication algorithm is either
HMAC-SHA-1-96 or MD5, with a key of up to 32 characters in length. The privacy
settings are based on the AES encryption standard, with a key of up to 32
characters in length. All keys are uppercase.
Table 6-28. Adding/Removing SNMP v3 Trap Users
Method Steps Notes
Web Interface Network > SNMP
1. Enter user name
2. Enter privacy phrase if required
3. Enter authentication phrase
4. Select authentication or "authentication
& privacy"
5. Select MD5 or SHA
6. Click "Save"
CLI n/a
Front Panel n/a
Note: All character except (<), (&), (>), ("), (') are accepted for
SNMP usernames, authentication or privacy keys.
To Next Page
Loading...
