098-00720-000 Revision D1 – February, 2018 SyncServer 600 Series User’s Guide 129
Chapter 4
Navigation Windows
Figure 4-46. Security - LDAP Configuration Window
Note: The SyncServer S600/S650 has only one level of management
access of Authentication/Authorization and that is full control. There is
no read-only management access. Therefore
Authentication = Authorization when there is only one level of
management access.
Note: In order to use LDAP authentication with the SSH login, a local
user must be created with the same username as used with LDAP.
This is not necessary for the web login.
Table 4-13. LDAP Configuration Parameters
Parameter / Column Description
Port - Server Binding IP port for server
Time Limit for
Searching
Timeout for searches
Time Limit for binding
(sec)
Timeout for binding
LDAP Protocol
Version
LDAPv2 or LDAPv3
To Next Page
Loading...
