Microsemi SyncServer S650 - Page 254

254 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
Appendix A System Messages
System Notification Messages
Enter/exit
time/freq
normal
4 Notify No Entered time/frequency
normal state
Transitioned out of
time/frequency normal
state
No action required
No action required
Enter/exit
time/freq
bridging
5 Notify No Entered time/frequency
bridging state
Transitioned out of
time/frequency bridging
state
No action required
No action required
Entered
time/frequency
holdover
6 Minor No Entered time/frequency
holdover state
Transitioned out of
holdover state
 Check input
references
 Check configuration
for correct reference
selection
 Check reference
status
 Check ref
configuration for
Priority values.
No action required
Entered
time/frequency
holdover recovery
8 Minor No Entered time/frequency
holdover recovery state
Transitioned out of
holdover recovery state
No action required
No action required
First normal-track
since power-up
9 Notify Yes First normal-track since
Power-Up
No action required
Table A-1. System Notification Messages (Continued)
Description
Event
ID
Msg
Level
Trans-
itory
MsgText Corrective Action