098-00720-000 Revision D1 – February, 2018 SyncServer 600 Series User’s Guide 21
How to Use This Guide
Structure of This Guide
Chapter 5, Command Line
Interface (CLI)
Describes the CLI command conventions, functions, and features.
Chapter 6, Provisioning Describes the commands and procedures required to provision the
SyncServer S6x0 after installing the unit.
Chapter 7, Maintenance,
Troubleshooting & Part Numbers
Contains preventive and corrective maintenance, and
troubleshooting procedures for the product. Also contains part
number and ordering information and procedures for returning the
SyncServer S6x0.
Appendix A, System Messages Lists the alarms and events and provides basic indications of the
source of the alarm.
Appendix B, Specifications and
Factory Defaults
Lists the specifications and factory defaults for the SyncServer
S6x0.
Appendix C, Installing GNSS
Antennas
Provides details about GNSS Antenna kits and procedures for
installing the GNSS antenna.
Appendix D, Software Licenses Contains licensing information for third party software.
Appendix E, IP Port Details Provides details about Ethernet, Management, and Timing ports.
Chapter, Title Description
To Next Page
Loading...
