Mirion Technologies Lynx II DSA - Sample Changer and Input Settings

Chapter 4 System Setup
36 Lynx II DSA User's Manual - 7096089
Figure 13 MID Plug and Play Discovery of Lynx II
Sample Changer
From the Device menu, select the Sample Changer command to display the following
dialog box.
Figure 14 Sample Changer Selection
Choices for the Sample Changer setup are:
• None
• Internal Chgr
• GammaAnalyst
• GammaProduct
The selection here determines the settings available in Genie’s run-time adjust dialog for
the Sample Changer interface.