Why is my Mitsubishi Inverter showing an undervoltage error?
If the Mitsubishi Inverter's power supply voltage decreases, the control circuit won't function normally. Check the power supply system equipment, including the power supply itself, to resolve this issue.
What to do if Mitsubishi 700 Inverter shows overload trip error?
If the temperature of the output transistor element exceeds the protection level when a current not less than the rated inverter current flows (200% or less), the electronic thermal relay activates, stopping the Mitsubishi Inverter output. To resolve this, try increasing the acceleration/deceleration time or adjusting the torque boost setting.
How to unlock operation panel on Mitsubishi 700 Inverter?
To release the operation panel lock on the Mitsubishi Inverter, press the lock button for 2 seconds.
General| Control Method | Vector Control |
|---|---|
| Overload Capacity | 150% of rated current for 60 seconds |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit |
| Communication Options | RS-485, Profibus, Ethernet |
| Output Power Range | 0.4 kW to 630 kW |
| Cooling Method | Forced air cooling (fan) (Varies by model) |
| Operating Temperature | -10 to +50°C (Varies by model, may be derated at higher temperatures) |
| Storage Temperature | -20 to +65°C |
| Humidity | 95% RH or less (non-condensing) |
| Altitude | Up to 1000 m above sea level (Derating may be required above 1000 m) |
| Enclosure Rating | IP20 |
| Model | FR-A700, FR-F700, FR-E700, FR-D700, FR-S700 |
Introduces the A7NETH-2P Ethernet communication interface and its capabilities.
Details the interface's features and hardware specifications.
Lists compatible inverter models and series for the plug-in option.
Instructions for checking received items and confirming product integrity.
Explains the function of the LEDs on the interface for status indication.
Essential safety precautions before proceeding with installation.
Step-by-step guide for installing the option on A700 and F700 inverters.
Step-by-step guide for installing the option on E700 inverters.
Instructions and precautions for connecting network cables to the interface card.
Configuration of IP address, subnet mask, and gateway for network connectivity.
Configuration of how the inverter is controlled (PU, External, Network).
Defines where operation and speed commands originate (RS-485 or option card).
Configures where parameter changes are saved (EEPROM or RAM).
Explains how inverter parameters are referenced by register numbers.
Details the command register (Register 1) for controlling the inverter.
Explains the frequency command registers (Register 2 and 3) for speed control.
Describes the register (Register 100) for monitoring inverter status.
Introduces the Mitsubishi Configuration Studio software for device management.
Covers common tasks like adding, viewing, updating, and deleting objects.
Configures network-related settings for communication.
Configures fail-safe behavior and timeout parameters.
Explains how the studio finds devices on the network.
Introduces the web server for remote monitoring and control via web browsers.
Provides access to real-time data and status information.
Offers a graphical overview of application variables using gauges and meters.
Covers loading custom web content and understanding XTPro protocol.
Explains the use of the interface card's onboard filesystem for configuration and web server content.
Describes accessing the filesystem via USB as a removable disk.
Details accessing the filesystem using FTP with Windows Explorer.
Discusses the ability to update the interface card's embedded firmware.
Step-by-step instructions for updating the firmware, including safety warnings.
Details Modbus/TCP server support, functions, and register mapping.
Covers EtherNet/IP server protocol, including messaging types and examples.
Demonstrates setting up a ControlLogix PLC with the communication interface.
Guides on using EDS Add-On Profiles for EtherNet/IP I/O connections.
Demonstrates setting up EtherNet/IP I/O connections with vendor-specific instances.
Details CSP (PCCC) server support for Allen-Bradley PLCs.
Covers BACnet/IP server support and its implementation conformance.
Covers PROFINET IO protocol, device settings, and configuration examples.
Provides a step-by-step guide for configuring PROFINET using TIA Portal.
Provides solutions for common issues like alarms, unresponsiveness, and communication failures.
To Next Page