10 - 14
10.2 Communication Detail Settings
10.2.3 Display contents of communication detail settings
3 Clear
To access an FX PLC where a keyword has been registered, keyword protection is cancelled.
1 Touching the key pops up a keyboard for keyword input.
2 When the correct keyword is input and the key is touched, the protection is cancelled.
*1: Refer to the manual for the PLC in use for the models that are compatible with the 2nd keyword.
4 Protect
A keyword with cancelled protection is reactivated for protection.
Keyword protection function is valid when the 2nd keyword is registered.
1 Touching the key activates keyword protection.
Tar g et P LC Settings
FX PLC compatible with 2nd keyword
*1
Input a keyword to cancel the protection.
FX PLC not compatible with 2nd keyword
*1
Input a keyword into "keyword" to cancel the protection.
"2nd keyword" is ignored.
Clear
Enter
Protect
To Next Page
Loading...
