Mitsubishi GOT1000 GT11 User Manual

12 - 2
12.1 Time Setting and Display
12.1.3 Clock setting operations
12.1.3 Clock setting operations
1 Clock setting
Setup the method to adjust the time between GOT data and the clock data of PLC CPU connected with
GOT.
Setting Contents
Adjust
Adjust the time of GOT clock data to the clock data of PLC CPU.
Same as setting in [GOT setup] in [System Environment] of GT Designer2.
GT Designer2 Version Screen Design Manual (Section 2.5 Clock Function)
Broadcast
Adjust the time of PLC CPU clock data to the clock data of GOT.
Same as setting in [GOT setup] in [System Environment] of GT Designer2.
GT Designer2 Version Screen Design Manual (Section 2.5 Clock Function)
Adjust/Broadcast
Adjust and Broadcast can be used appropriately.
Same as setting in [GOT setup] in [System Environment] of GT Designer2.
GT Designer2 Version Screen Design Manual (Section 2.5 Clock Function)
None No adjustment of clock data.
1 If touch the setup item, the setup contents
is changed.
()
2 If touch button, the setup contents is
reflected.
3 If touch button without touching
button, the dialogue box shown on the left
is displayed.
button: The changed value is
canceled, and the screen
is closed.
button: The time display and
setting screen is displayed.
4 If touch button, GOT restarts. After
restart, GOT operates with the changed
settings.
A
djust Broadcast NoneAdjust/Broadcast
OK
OK
OK
Cancel

Mitsubishi GOT1000 GT11 Specifications

General

Power Supply	24V DC
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 60°C
Screen Size	5.7 inches
Resolution	320 x 240 pixels
Communication Interface	RS-422/485, USB
Memory	Internal flash memory
CPU	RISC
Touch Panel	Analog Resistive