Motion Control Engineering 2000 - Page 291

Index-9
options, setting to default values 5-13
OTHER CAR SERVES FRNT/FLR 1? option 5-18
OTHER CAR SERVES REAR/FLR 1? option 5-18
OTTS 5-35
OVER TMP SWITCH CONTACT 5-53
Overload Condition message 6-31
OVL, Overload Input 5-36
OVL2, Overload 2 Input 5-36
P
Parameter ID (F7) 5-102
parameters, setting to default values 5-13
PARKING DELAY TIMER 5-27
PARKING FLOOR option 5-19
Passcode Request message 5-5, 6-31
Passcode Requested message 5-62
password
entering the computer security password 5-5
PC Board Quick References 6-37–??
HC-CHP CAN Hub and Power Supply Board 6-38
HC-DVR Driver Board 6-47
HC-MPU Main Processor Board 6-50
PFG ENABLE BUTTON? option 5-28
PFG, Passing floor gong output flag 5-10
PFGE, Passing Floor Gong Enable Input 5-36
PFGX, Passing Floor Gong Auxiliary Output 5-46
PH1, Fire Service Phase I Return Complete Output 5-46
PH1, Phase 1 return complete flag 5-10
PHE 6-41, 6-44
PHE, Photo eye input flag 5-10
PHER, Photo eye input (rear) flag 5-10
PHERX, Rear Photo Eye Auxiliary input 5-36
PHEX, Photo Eye Auxiliary input 5-36
PHOTO EYE ANTI-NUISANCE? option 5-48
PI OUTPUT TYPE option 5-48
PI TURNED OFF IF NO DEMAND? option 5-50
PI1 - PI8 Position Indicator outputs 5-46
PI1 - PI8, Position Indicator ourputs (discrete) 5-47
PIC, PI correction flag 5-10
PITFLD, Pit Flood inut 5-36
Placing calls from the controller 4-3, 5-69
PMT 6-3
Power line fluctuation 2-3
Power Transfer Input Active message 6-31
PRE-OPENING option 5-23
PRESSURE SWITCH ACTIVATED message 6-32
PREVENT DCP TIL DOORS CLOSE? option 5-25
PRIFLG, Priority Service Output 5-46
Program Mode 5-14–5-55
Programmable, auxiliary step down input 5-37
Programmable, auxiliary step up input. 5-37
PSS, Pressure Switch Input 5-36
PTI, Power Transfer Input 5-36
PTIC, Complimented PTI input 5-36
pump motor
wiring 2-9
R
R2, Absolute floor encoding #2 flag 5-10
R2AB, 2AB Relay Redundancy Monitoring Input 5-36
R2L INPUT FAILURE message 6-32
R3, Absolute floor encoding #3 flag 5-10
R4, Absolute floor encoding #4 flag 5-10
R5, R4, R3, R2, Floor Encoding Input 5-36
RBAB, BAB Relay Redundancy Monitoring Input 5-36
RDLSR, Rear Door Lock Relay Redundancy Input 5-36
REAR CAR DOOR BYPASS SW FAILURE 6-32
Rear DOL & DLK are Both Active message 6-32
REAR DOOR CLOSE LIMITS option 5-55
Rear Door is Locked but not fully closed message 6-32
Rear Door Lock Switch Failure message 6-32
REAR DOOR MECH. COUPLED option 5-25
Rear Door Open Limit Failure message 6-32
Rear Gate Switch Failure message 6-32
REAR HOISTWAY DOOR BYPASS SW. FAILURE message
6-32
REAR, Rear door flag 5-10
Receive/Transmit screen 5-99
REDUCE HCT WITH PHOTO EYE option 5-25
Redundancy Door Lock Relay Failure message 6-33
Redundancy Front Gate Switch Failure message 6-33
Redundancy Rear Gate Switch Failure message 6-33
Refresh Device 5-99
Refresh XPort 5-99
Registering car calls 4-3, 5-69
relevel operation, description 4-6
Re-Leveling Distance 5-104
REO, Re-Open Input 5-37
REO, Re-Open Input option 5-37
Re-Open Input 5-35, 5-37
Reset XPort screen 5-99
Resolving Faults 3-5
RESTORING SAFETY message 6-33
RETAIN CALLS ON CTL/CTF option 5-50
RETIRING CAM option 5-22
RFI 2-3
RFV INPUT FAILED TO ACTIVATE message 6-33
RFV INPUT FAILED TO DEACTIVATE message 6-33
RFV, Redundancy Fast Valve input 5-37
RGSR, Redundancy Gate Switch (rear) input 5-37
RINAX, INAX Relay Redundancy Monitoring Input 5-37
RP SENSOR TRIPPED message 6-33
RSG, Redundancy Gate Switch (front) input 5-37
RSV INPUT FAILED TO ACTIVATE message 6-34
RSV INPUT FAILED TO DEACTIVATE message 6-34
RSV, Redundancy Slow Valve input 5-37
RUN, Run flag 5-10
S
SAB, Sabbath input flag 5-10
SAB, Sabbath Operation Input 5-37
Sabbath Operation Active message 6-34
SABBATH OPERATION option 5-52
SAF, Safety string input flag 5-10
SAFC 6-41, 6-42
SAFC INPUT FAILURE message 6-34
Safety Circuit is Open message 6-34
SAFETY DROPPED BY SPB message 6-34
SAFH 6-41, 6-42
SAFO, Safety output 5-46