B
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
237
573408-001-a
Parameter Description
Communication
Values are:
• Disconnected – No heartbeats have been received from secondary or
communication timed out
• Connected – Heartbeat has been received and communication has not timed
out
The default is Disconnected.
Configuration
Values are:
• Unknown – State of secondary configuration is not applicable, or secondary
not connected
• Synchronized – Secondary has same configuration as primary (except for
QAM outputs)
• Out of Sync – Secondary configuration is not in sync with primary
The default is Unknown.
Redundant APEX IP
Shows the IP address of the heartbeat interface in the redundancy pair.
Redundancy Alarm Status
• Primary Failover
• Secondary
Failover
• Availability Fault
• Link Fault
• Configuration
Fault
Shows the current alarm state of these redundancy functions. This section of
the window duplicates a portion of the
APEX Alarms window.
For further Redundancy Alarm Status details, reference Alarms Window Field
Definitions.
To Next Page
Loading...
Need help?
General
