Converter transmissions for off-road equipment
List of lubricantsTE-ML 03
Product groups
Ergopower
Lubricants authorized
for service fills (1)
WG 310
(I) Transmissions adapted to suit to ATF
Lubricant class 03D
(II) Transmission to suit to ENGINE OIL
Lubricant class 03A / 03B
Note: TCU is set to meet classes (I) and (II).
By changing between ATF and Engine oil, the transmission oil system must be completely
drained. The oil coolers and hoses must be drained as well.
When the new oil is filled up, a flushing of the system is necessary; Start the engine, warm up
the transmission and drain the oil again.
This is done to be sure that the old oil is completely out of the system.
Fill up with new oil and check the oil level.
Temperature range:
Viscosity class Use at outside
temperatures as of
- ATF
- SAE 5W-30, 5W-40
- SAE 10W, 10W-30, 10W-40
- SAE 15W-30, 15W-40
- SAE 20W-20
- SAE 30
- 40°C
- 35°C
- 30°C
- 25°C
- 20°C
- 10°C
(*) See overleaf for approved trade products.
To Next Page
Loading...