Moxy MT 31 - Diagnostic Prosedure; Use of Diagnostic Kit, Machine

SHOP MANUAL MT26-31 - 06.2005
Engine
Tier-3 710655-
Ch 1 page 18
VCI
2
Use of diagnostic kit, machine
2
Install the VCI (ECOM programming unit)
Moxy No.513376
1. Switch on the laptop.
2. Connect the cabel end (1) to the CT1 unit
3. Connect the USB plug (2) to the Laptop
4. Put in the USB key
5. Switch on the ignition key (If read the setting
parameters)
6. Start the engine. (If controlling of the param-
eters)
7. Start on Laptop the engine ECOM program.
4
1
3
Diagnostic prosedure