Subject to modifications
User Manual
Operation Instructions
2.1A-30008-A04
Page 23 of 48
LINCOLN GmbH & Co. KG • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
Setting and Operation
Factory Settings
Programming steps Factory Setting Description Page
4215a99
0.0
6 hours Pause time 26
4217a99
0.30
0 minutes Pause time 26
4218a99
0.1
Lubrication cycles:
1 cycle (metering device cycle)
27
6252b04
n.0
Signal output of the fault relay:
NO (normally open)
Signalizing during the failure or low-level
indi cation
27
Operator Keys
Key Function
4222a99
Key for modifying the
parameters in the pro-
gramming step
Key Function
4214a99
Key for switching to the
next programming step
External triggering of an additional lubrication cycle
20002458
Fig. 38 Key for triggering an additional lubrication cycle
Press key > 2 seconds.
To Next Page
Loading...