SHOP MANUAL MT26/31 - 08.2006 SHOP MANUAL MT26/31 - 08.2006
SHOP MANUAL MT26/31 - 08.2006 SHOP MANUAL MT26/31 - 08.2006
Ch 2 page 55
TRANSMISSION
Troubleshooting
1. Oil level as well as oil quality must correspond with ZF-list of
lubricants (TE-ML 03) for the new WG-Transmission Product
range!
2. Transmission temperature from 80°C to 100°C !
3. Please, pay attention that the prescribed Operation Instructions
habe been used.
(i.e.: correct connection of all lines)
4 Functional check of the electric system only with tester
recommended by ZF!
5 Fuse “F1” and “F2” (8 ampere; see Circuit diagram) are O.K.!
6 At all operations on the vehicle (such as e.g. welding) or works
on the Electronic system (as e.G. connection of Testers), switch
off the ignition or separate the Electronic box, resp. disconnect
the battery.
Prerequisites for the troubleshooting
To Next Page
Loading...