Issue 2.0
SV9100 Networking Manual 4-29
A station connected to a PBX can retrieve a parked call in an UNIVERGE
SV9100, but the station connected to the UNIVERGE SV9100 system cannot
retrieve a parked call in a PBX.
A Park Hold key cannot be used to retrieve a parked call from a distant system.
F-Routes are required to route Call Park Retrieve Access Code to proper
system in the K-CCIS network.
When a remote location retrieves a call from another location, the call is treated
as if it were transferred from the distant location.
SMDR reports the retrieved call from the distant location as if it were a
transferred call.
When a call that has Caller ID Information is retrieved at the distant location the
Caller ID information is treated as if it were a transferred call.
Link Reconnect operates when the trunk is retrieved back to the origination
system.
Restrictions:
A Call cannot be placed into remote systems Call Park Location.
Call Park Retrieve – K-CCIS is only a Key System-to-Key System supported
feature.
The digit (# or ) cannot be used in conjunction with IP K-CCIS.
When the UNIVERGE SV9100 is connected to the Electra Elite IPK II, the
maximum digits assignment in the UNIVERGE SV9100 is determined by
Program 44-05-09.
Call Park Searching is supported in the local system only.
RELATED FEATURE LIST
Call Park – System
To Next Page
Loading...
