NEC Univerge SV9100 - Page 110

Issue 2.0
SV9100 Networking Manual 4-31
44-02-03 Dial Analysis Table for ARS/
F-Route Access –
Additional Data
0 = No setting
1 = Delete Digits = 0~255
(255 = delete all
digits)
2 = 0~500
3 = Dial Extension
Analyze Table
Number = 0~4
Default is 0
Enter additional data required for the Service Type
selected in PRG 44-02-02.
44-05-01 ARS/F-Route Table – Trunk
Group Number
0 = Not Set
1 ~ 100 = Trunk Group
from 14-05
101 ~ 150 Networking
255 = Extension Call
Default is 0
Select trunk group number used for outgoing ARS
calls.
Setting of 255 = Internal Extension Call.
44-05-02 ARS/F-Route Table –
Delete digits
0 = No setting
1~254
255 = Delete all Digits
Default is 0
Enter number of digits to delete from the dialed
number.
44-05-03 ARS/F-Route Table –
Additional Dial Number
Table
0 = No setting
1~1000
Default is 0
Enter table number (defined in 44-06) for additional
digits to be dialed.
44-05-09 ARS/F-Route Table – Max
Digit
0 = No Max
1~24
Default is 0
Assign Max digits for the Call Park Retrieve Access
Code.
Program/
Item No.
Description/Selection Assigned Data Comments