Issue 2.0
4-72 Features and Specifications
SERVICE CONDITIONS
General:
Give careful consideration to the network numbering plan to avoid needless
loss of Access Codes or duplication of telephone numbers.
The first digit or first two digits of a telephone number distinguishes one system
from another system.
Station Numbering Plan can have 2~8 digits.
Restrictions:
Tenant service is not provided, i.e., numbers cannot be duplicated for different
tenants.
Extension numbers should not start with 0,9,* or #.
For non-K-CCIS feature support, refer to the UNIVERGE SV9100 Features and
Specifications Manual, Flexible Numbering Plan feature.
RELATED FEATURE LIST
Key-Common Channel Interoffice Signaling (K-CCIS)
Station-to-Station Calling – K-CCIS
Uniform Numbering Plan – K-CCIS
GUIDE TO FEATURE PROGRAMMING
This guide provides a list of associated Programs that support this feature.
Program/
Item No.
Description/Selection Assigned Data Comments
11-11-01 System Numbering Default is 1 = 3-digit;
Intercom
Refer to the UNIVERGE SV9100 Programming
Manual for all options and default settings.
11-02-01 Extension Numbering –Dial
(up to eight digits)
Default :
Port 1 ~ 99 = 101 ~ 199
Port 100 ~ 960 = 3101 ~
3961
Assign up to eight digits for Extension Numbers.
To Next Page
Loading...
