Issue 2.0
SV9100 Networking Manual 4-73
11-20-01 Dial Extension Analyze
Table – Dial (up to eight
digits)
Use tables 01~128 to
assign the digits to be
dialed using the Dial
Extension Analyze Tables.
These tables are used
when Program 11-01-01 is
set to option 9 = Dial
Extension Analyze.
(Up to eight digits can be
assigned with valid entries:
0, 1~9,
#, ).
Valid entries:
0, 1~9,
#,
Default is not assigned.
11-20-02 Dial Extension Analyze
Table – Type of Dials
Assign the type of dial for
the Dial Extension Analyze
Table from Program 11-20-
01.
(Svc Code, Intercom,
operator, or F-Route)
0 = Not used
1 = Service Code
2 = Intercom
5 = Operator
6 = F-Route
Default is Not Set.
Program/
Item No.
Description/Selection Assigned Data Comments
To Next Page
Loading...
