Issue 2.0
SV9100 Networking Manual 4-93
Program 31-02-01 (Internal Paging Group Number) applies to
Paging Access – (K-CCIS).
Program 31-02-02 (Internal All Call Paging Receiving) applies to
Paging Access – (K-CCIS).
Restrictions:
Amplifiers and speakers must be locally provided.
Combined Paging is not supported over K-CCIS.
Internal Paging across K-CCIS is supported only between UNIVERGE SV9100
and UNIVERGE SV9100.
RELATED FEATURE LIST
Background Music Over External Speakers
External Zone Paging (Meet-Me)
Internal Zone Paging (Meet-Me)
GUIDE TO FEATURE PROGRAMMING
This guide provides a list of associated Programs that support this feature.
For Paging Installation
Program/
Item No.
Description/Selection Assigned Data Comments
10-03-01 ETU Setup – Terminal Type
(B1)
0 = Not Set
1 = Multiline Terminal
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Door Box)
9 = PGD (ACI)
10 = DSS Console
11 = ---Not Used---
Assign ESI port for External Paging.
11-01-01 System Numbering Default is 51 = 2 digit: F-
Route.
This Service Code must be assigned also in PRG
11-12-20.
11-12-20 Service Code Setup (for
Service Access) – External
Paging
Default is 703 Setting 703 should be changed based on the
K-CCIS network configuration.
To Next Page
Loading...
