NEC Univerge SV9100 - Page 173

Issue 2.0
4-94 Features and Specifications
11-12-22 Service Code Setup
(Service Access) – Meet
Me Answer to External
Paging
Default is 765 The Service Code assigned in this Program is used
for Meet Me Answer to External Paging.
15-07-01 Programmable Function
Keys
19 = External. Group
Paging 1~8
20 = External. All Call
Paging
21 = Internal. Group
Paging 1~64
22 = Internal. All Call
Paging
Set the functions of programmable extension
Function Keys.
20-10-06 Class of Service Options
(Answer Service) – Meet
Me Conference and Paging
0 = Off
1 = On
Default is 1
Enable Meet Me Conferencing and Paging.
20-14-07 Class of Service Options for
DISA/E&M – External
Paging
0 = Off
1 = On
Default is 1
Allow DISA or Tie Line Trunk user to use External
Paging.
31-01-01 System Options for Internal/
External Paging –All Call
Paging Zone Name
Up to 12 Characters
Default is Group All
Assign a name to each All Call Internal Paging
Zone. The name is displayed to make the
announcement.
31-01-02 System Options for Internal/
External Paging –Page
Announcement Duration
0~64800 seconds
Default is 1200
Set the length of Paging Announcements.
31-01-04 System Options for Internal/
External Paging –Privacy
Release Time
0~64800 seconds
Default is 90
After user initiates a Meet Me or Voice Call
conference, the system waits this time for the
Paged Party to answer the call.
31-04-01 External Paging Zone
Group
0 = No Setting
Default:
Speaker 1 = Group 1
Speaker 2 = Group 2
Speaker 3 = Group 3
Speaker 4 = Group 4
Speaker 5 = Group 5
Speaker 6 = Group 6
Speaker 7 = Group 7
Speaker 8 = Group 8
Speaker 9 = CPU Group
1
Assign each External Paging Zone to an External
Paging Group.
Program/
Item No.
Description/Selection Assigned Data Comments