NEC Univerge SV9100 - Page 282

Issue 2.0
4-18 Programming
Description
Use Program 10-04 : Music on Hold Setup to set the Music on Hold (MOH) source.
For internal Music on Hold, the system can provide a service tone callers on hold or
one of eleven synthesized selections.
Conditions
None
Program 10 : System Configuration Setup
10-04 : Music On Hold Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default Description
01
Music on Hold
Source Selection
0 = Internal MOH(IC)
1 = External MOH
2 = Service Tone
3 = VMDB
2
The Music on Hold (MOH)
source can be internal
(synthesized) or from a
customer-provided music
source.
The customer-provided source
can connect to a PGD(2)-U13
or the connector on the side of
the Base Cabinet MOH/IN
connection.
Trunk MOH and Extension
MOH music source use the
same Music on Hold source.
02
Music on Hold
Tone Selection
[In case Item 1 is 0]
1 = Download File1
2 = Download File2
3 = Download File3
[In case Item 1 is 1, 2,
or 3]
1~100 = VRS Message
Number
03
Audio Gain Setup
1~57 (-15.5 ~ +12.5dB)
32
(0dB)