NEC Univerge SV9100 - Page 281

Issue 2.0
SV9100 Networking Manual 4-17
Conditions
 When changing a defined terminal type, first set the type to 0 and then plug the
new device in to have the system automatically define it, or redefine the type
manually.
 The system must have a blade installed to view/change the options for that type
of blade.
Feature Cross Reference
 Universal Slots
06
Number of Ports
0 = Auto
1 = 4 Ports
2 = 8 Ports
3 = 12 Ports
4 = 16 Ports
5 = 20 Ports
0
07
Straight/Cross Wiring
0 = Auto
1 = Manual (Cross)
2 = Manual (Straight)
0
Item
No.
Item Input Data Default