NEC Univerge SV9100 - Page 290

Issue 2.0
4-26 Programming
Description
Use Program 10-16 : Option Information Setup to set up the option given from the
DHCP server to each client.
Program 10 : System Configuration Setup
10-16 : Option Information Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default
01
Router
Set the Router IP address.
Code number 0~255
3 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
02
DNS Server
Set IP address of DNS Server.
Code number 0~255
6 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
03
TFTP Server
Set the name for the TFTP
Server.
Code number 0~255
66 (Fixed)
Maximum 64 character strings
No setting
05
MGC
Code number 0~255
129 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
06
Client Host Name
Set the Client Host Name.
Code number 0~255
12 (Fixed)
Maximum 64 character strings
No setting
07
DNS Domain Name
Set the DNS Domain Name.
Code number 0~255
15 (Fixed)
Maximum 20 character strings
No setting
08
Download Protocol
Set Download Protocol used
for AutoConfig (for DT800/
DT700 Series).
Code number 0~255
43 (Fixed)
Sub code number
163
1 = FTP
2 = HTTP
1