NEC Univerge SV9100 - Page 446

Issue 2.0
SV9100 Networking Manual 8-55
15-05-27
IP Telephone
Terminal Basic Data
Setup –Personal ID
Index
For SIP Multiline phone using
Manual/Auto registration. Assign
each phone a unique personal
index. When complete go to
command 84-22 and set the user
name and password.
0 = Not Set
1-960 = Set
Default is 0
X
15-05-28
IP Telephone
Terminal Basic Data
Setup –Additional
Information Setup
0 = Disable
1 = Enable
Default is 0
X
15-05-29
IP Telephone
Terminal Basic Data
Setup –Terminal
WAN Side IP
Address
Future use with NAT
0.0.0.0 ~
255.255.255.255
Default is 0.0.0.0
X
15-05-30
IP Telephone
Terminal Basic Data
Setup –DTMF Play
During Conversation
at Receive
Extension
0 = Disable
1 = Enable
Default is 0
X
15-05-31
IP Telephone
Terminal Basic Data
Setup – Alarm Tone
During Conversation
(RTP packet loss
alarm)
0 = Disable
1 = Enable
Default is 1
X
15-05-32
IP Telephone
Terminal Basic Data
Setup – Key Pad
Talkie
0 = Disable
1 = Enable
Default is 0
X
15-05-33
IP Telephone
Terminal Basic Data
Setup – LAN Side IP
Address of Terminal
0 = Disable
1 = Enable
Default is 0.0.0.0
READ ONLY
X
15-05-34
IP Telephone
Terminal Basic Data
Setup – Terminal
Touch Panel On/Off
Whether the touch screen
used on ITL-320C-( ) (BK)
TEL can be used (1) or
cannot be used (0).
0 = Off
1 = On
Default is 1
X
Program
Number
Program Name Description/Comments Assigned Data 1 2 3