Issue 2.0
9-8 IP Single Line Telephone (SIP)
System Availability
Terminals
Standard SIP Terminal
Required Components
GCD-CP10
GPZ-IPLE
Related Features
IP Single Line Telephone (SIP)
Transfer
Programming
Program
Number
Program Name Description/Comments Assigned Data 1 2 3
10-12-03
GCD-CP10 Network
Setup- Default Gateway
Assign the default gateway IP
Address for the CPU.
0.0.0.0~
126.255.255.254
128.0.0.1~
191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
X
10-12-07
GCD-CP10 Network
Setup - NAPT Router IP
Address (Default
Gateway [WAN]
Define the IP of the WAN side
Of the router.
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
(default = 0.0.0.0)
X
10-12-08
GCD-CP10 Network
Setup – ICMP Redirect
When receiving ICMP redirect
messages, this determines if
the IP Routing Table updates
automatically or not.
0= (Enable)
1= (Disable)
(default = 0)
X
10-12-09
GCD-CP10 Network
Setup – IP Address
Assign the IP Address for the
VoIPDB. If a VoIPDB is
installed in the system it is
recommended to set PRG 10-
12-01 to 0.0.0.0 and all
connections to the system will
be made through the VoIPDB.
0.0.0.0~
126.255.255.254
128.0.0.1~
191.255.255.254
192.0.0.1~
223.255.255.254
(default =
172.16.0.10)
X
To Next Page
Loading...
