NEC Univerge SV9100 - Page 545

Issue 2.0
10-58 SV9100 NetLink
04
Time Zone
0~24 (0 = -12 Hours and 24 = +12 Hours)
+7
(-5 hours)
Determine the offset
from Greenwich Mean
Time (GMT) time.
Then enter its
respective value. For
example, Eastern
Time (US and
Canada) has a GMT
offset of -5. The
program data would
then be 7 (0= -12, 1=
-11, 2= -10, 3= -9, 4= -
8, 5= -7, 6= -6, 7= -5,
……24= +12)
05
NIC
Interface
0 = Auto Detect
1 = 100Mbps, Full-Duplex
2 = 100Mbps, Half-Duplex
3 = 10Mbps, Full-Duplex
4 = 10Mbps, Half-Duplex
0
NIC Auto Negotiate
(GCD-CP10)
07
NAPT
Router IP
Address
(Default
Gateway
[WAN])
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
Set the IP address on
the WAN side of
router.
08
ICMP
Redirect
0= (Enable)
1= (Disable)
0
When receiving ICMP
redirect message,
determine if the IP
Routing Table
updates automatically
or not.
09
IP Address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
Set for IPLE.
10
Subnet
Mask
128.0.0.0 192.0.0.0 224.0.0.0
240.0.0.0 248.0.0.0 252.0.0.0
254.0.0.0 255.0.0.0 255.128.0.0
255.192.0.0 255.224.0.0 255.240.0.0
255.248.0.0 255.252.0.0 255.254.0.0
255.255.0.0 255.255.128.0 255.255.192.0
255.255.224.0 255.255.240.0 255.255.248.0
255.255.252.0 255.255.254.0 255.255.255.0
255.255.255.128 255.255.255.192 255.255.255.224
255.255.255.240 255.255.255.248 255.255.255.252
255.255.255.254 255.255.255.255
255.255.0.0
Set for IPLE.
Input Data (Continued)
Item
No.
Item Input Data Default Description