Issue 2.0
10-62 SV9100 NetLink
Conditions
None
Feature Cross Reference
None
04
Signal Transmit Method
0 = Immediate
This is the default setting which does not use
Nagle Algorithm. When this is enabled data
packets are immediately sent across the
network with no buffering delay.
1 = Buffering
Nagle Algorithm enabled. This means that
small data packets will not be transmitted
immediately across the network. The smaller
data packets will be buffered and then sent
across as larger data packets therefore
decreasing the number of packets sent across
the network. When the number of packets
sent across the network decreases, the
amount of bandwidth also decreases.
0 = Immediate
1 = Buffering
0
Input Data (Continued)
To Next Page
Loading...
