NEC Univerge SV9100 - Page 550

Issue 2.0
SV9100 Networking Manual 10-63
Description
Use Program 51-02 : NetLink System Individual Setting to set system data for
each NetLink system.
Program 51 : NetLink Service
51-02 : NetLink System Individual Setting
Level:
IN
NOTE

Program 51-02-03 is not used in US, but is used in other countries.
Input Data
System ID 1~50
Item
No.
Item Input Data Default
01
System Name
This name is given to each system.
Up to 20 characters.
blank
02
Time Zone (Hour)
Determine the time offset from the Primary
system.
(0 = -12, 1 = -11, 2 = -10.... 12 = 0
13 = +1, 14 = +2, 24 = +12)
This setting affects Time Display on MLT
(see Program 51-13-02).
0~24
12
03
Time Zone (Minute)
Determine the time offset from the Primary
system.
(0 = -60, 1 = -59, 2 = -58.... 120 = +60)
This setting affects Time Display on MLT
(see Program 51-13-02).
This program is not used in the US, but is
used in other countries.
0~120
60
04
Authenticate System MAC Address
To use this function, set Program 51-13-03
to 1 (enable), NetLink systems reject the
connection from unauthenticated system
access.
00-00-00-00-00-00~
FF-FF-FF-FF-FF-FF
00-00-00-00-00-00