NEC Univerge SV9100 - Page 667

Issue 2.0
13-72 AspireNet
04 Time Zone
0~24 (0 = -12 Hours and 24 = +12 Hours)
12
Determine the offset
from Greenwich Mean
Time (GMT) time.
Then enter its
respective value. For
example, Eastern
Time (US and
Canada) has a GMT
offset of -5. The
program data would
then be 7 (0= -12, 1=
-11, 2= -10, 3= -9, 4= -
8, 5= -7, 6= -6, 7= -5,
……24= +12)
05
NIC
Interface
0 = Auto Detect
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
0
NIC Auto Negotiate
(GCD-CP10)
06
Network
Address
Port
Translation(
NAPT)
Router
Setup
0 = No (Disable)
1 = Yes (Enable)
0
If using an external
NAPT Router or not.
07
NAPT
Router IP
Address
(Default
Gateway
[WAN])
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
Sets the IP address
on the WAN side of
router.
08
ICMP
Redirect
0= (Enable)
1= (Disable)
0
When receiving ICMP
redirect message, this
determines if the IP
Routing Table
updates automatically
or not.
09
IP Address 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
Input Data (Continued)
Item
No.
Item Input Data Default Description