Issue 2.0
SV9100 Networking Manual 13-83
Default
See the following tables for default settings.
9
Dial Extension Analyze
11-20 : Dial Extension Analyze Table
Changing the Dial Type for a range of codes can have a dramatic affect on how your system operates.
Assume, for example, the site is a hotel that has room numbers from 100-399. To make extension
numbers correspond to room numbers, you should use Program 11-02 to reassign extension numbers on
each floor from 100 to 399. (Other applications might also require you to change entries in Program
11-10 ~ 11-16.)
Table 13-5 System Numbering Default Settings
Dial Types: 1=Service Code, 2=Extension Number, 3=Trunk Access, 4=Special Trunk Access,
5=Operator Access, 6=Flexible Routing, 8 = Networking 9 = Dial Extension Analyze, 0=None
Dialed
Number of Digits
Required
Dial Type
Network System
ID [if type 8] 0~50
Default New
Default New
1X 3 2
11 0 0
12 0 0
13 0 0
14 0 0
15 0 0
16 0 0
17 0 0
18 0 0
19 0 0
10 0 0
1
00
1
# 00
2X 3 2
21 0 0
22 0 0
23 0 0
24 0 0
25 0 0
26 0 0
Dial
Types
Dial Type Description Related Program
To Next Page
Loading...
