NEC Univerge SV9100 - Page 754

Issue 2.0
SV9100 Networking Manual 13-159
08
G.729 Silence Compression
(VAD) Mode
Select whether to compress silence
with G.729. When there is silence,
the RTP packet is not sent.
0 =Disable
1 =Enable
0
09
G.729 Jitter Buffer - Minimum
Set the minimum value of the Jitter
Buffer of G.729 is set. Jitter is the
variation in the time between
packets arriving and the buffer
allows this variation to be
absorbed.
0-270 ms
30
10
G.729 Jitter Buffer - Standard
Set the average G.729 Jitter Buffer.
0-270 ms
60
11
G.729 Jitter Buffer - Maximum
Set the maximum G.729 Jitter
Buffer.
0-270 ms
120
12
Number of G.723 Audio Frame
Maximum number of the G.723
Audio Frame.
1=30 msec
2=60 msec
1
13
G.723 Silence Compression
(VAD) Mode
If enabled, RTP packets are not
sent for the compressed silence.
0 =Disable
1 =Enable
0
14
G.723 Jitter Buffer - Minimum
Set the minimum value of the
G.723 Jitter Buffer.
0~270 ms
30
15
G.723 Jitter Buffer - Standard
Set the average value of the G.723
Jitter Buffer.
0~270 ms
60
16
G.723 Jitter Buffer - Maximum
Set the maximum value of the
G.723 Jitter Buffer.
0~270 ms
120
17
Jitter Buffer Mode
Set the mode of the Jitter Buffer.
1 = Size set to the fixed amount
for the codec.
2 = The minimum/maximum
range for the codec is used.
3 = The minimum/maximum
range for the codec is used
and adjusts at any time,
regardless of silence.
1=static
2 =adaptive during silence
3 =adaptive immediately
3
Input Data
Ite
m
No.
Item Input Data Default