Issue 2.0
SV9100 Networking Manual 4-15
To set Call Forward – Busy/No Answer - K-CCIS from a Multiline Telephone
(Open Numbering Plan):
1. Press the Call Forward – Busy/No Answer ON/OFF key.
2. Dial 1 to set.
3. Dial the trunk Access Code (normally 8).
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code
744 (default), then Dial 1 to set.
3. Dial the trunk Access Code (normally 8).
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Restore handset or press Speaker.
To cancel Call Forward – Busy/No Answer – K-CCIS from a Multiline Telephone:
1. Press Call Forward – Busy/No Answer On/Off key.
2. Dial 0 to cancel.
3. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code
744 (default), then Dial 0 to cancel.
3. Restore handset or press Speaker.
SERVICE CONDITIONS
General:
Any station or Call Arrival (CAR) key can be set for Call Forwarding – Busy/No
Answer – K-CCIS.
Restrictions:
Call Forward – Off-Premise must be allowed in Class of Service (PRG
20-11-12) External Call forward to set call forwarding to a remote K-CCIS
station number.
To Next Page
Loading...
