Firewall Protection
145
NETGEAR ProSAFE VPN Firewall FVS318G v2
2. Select Security > Firewall > DMZ WAN Rules.
3. To change an existing outbound or inbound service rule, in the Act
ion column to the right of
the rule, click one of the following table buttons:
• Up. Moves the rule up one position in the table rank.
• Down. Moves the rule d
own one position in the table rank.
• Edit. Allows you to change
the definition of an existing rule. Depending on your
selection, one of the following screens displays:
- Edit DMZ WAN Outbou
nd Service screen for IPv4
- Edit DMZ WAN Inb
ound Service screen for IPv4
4. Click the Ap
ply button.
Your changes are saved.
To access the DMZ WAN Rules screen for IPv6 or to change existing IPv6 rules:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
