Virtual Private Networking Using IPSec and L2TP Connections
276
NETGEAR ProSAFE VPN Firewall FVS318G v2
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select VPN
>
IPSec VPN > Mode Config.
The Mode Config screen displays.
3. In the Action column for the record that you want to modify, click
the Edit button.
The Edit Mode Config Record screen displays. This screen is identical to the Add
Mode
Config Record screen.
4. Modif
y the settings as described in T
able 56 on page 263.
5. Click the Appl
y button.
Your changes are saved.
To delete one or more Mode Config records:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click
the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select VPN
>
IPSec VPN > Mode Config.
The Mode Config screen displays.
3. Select the check box to the left of each record that you want to
delete or click the Select All
table button to select all records.
4. Click the Delete
table button.
Configure Keep-Alives and Dead Peer Detection
In some cases, you might not want a VPN tunnel to be disconnected when traffic is idle, for
example, when client-server applications over the tunnel cannot tolerate the tunnel
To Next Page
Loading...
Need help?
General
Weight and Dimensions
