Manage Users, Authentication, and VPN Certificates
295
NETGEAR ProSAFE VPN Firewall FVS318G v2
The Groups screen displays.
3. In the List of Groups table, select the check box to the left of each group that you want to
delete
or click the Select All table button to select all groups.
4. Click the Del
ete table button.
The information is deleted.
Edit Groups
For groups that were automatically created when you created a domain, you can modify only
the idle time-out settings but not the group name or associated domain.
For groups that you created on the Add Groups screen, you can modify the do
main and the
idle time-out settings but not the group name.
To edit a VPN group:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Users
>
Groups.
The Groups screen displays.
3. In the Action column of the List of Groups table, for the group
that you want to edit, click the
Edit table button.
The Edit Groups screen displays. This screen is identical to the Add Grou
ps screen.
4. Modify the settings as described in T
able 67 on page 294.
5. Click the Ap
ply button.
Your changes are saved.
Configure User Accounts
When you create a user account, you must assign the user to a user group. When you create
a group, you must assign the group to a domain that specifies the authentication method.
Therefore, you should first create any domains, then groups, and then user accounts.
IPSec VPN and L2TP users do not belong to a domain and are not assigne
d to a
group.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
