NETGEAR FVS318G User Manual

Firewall Protection
183
NETGEAR ProSAFE VPN Firewall FVS318G v2
3. In the List of Bandwidth Profiles table to the right of the bandwidth profile that you want to
edit, click the Edit table button.
The Edit Bandwidth Profile screen displays.
4. Modify the settings that you wish to change.
See T
able 34 on page 181.
5. Click the Ap
ply button.
Your changes are saved.
 To delete one or more bandwidth profiles:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Se
curity > Bandwidth Profiles.
The Bandwidth Profiles screen displays.
3. In the List of Bandwidth Profiles table, select the check box to the left of each bandwidth
profile
that you want to delete or click the Select All table button to select all profiles.
4. To delete the selected profile or profiles, click the Delete
table button.
The information is deleted.
Preconfigured Quality of Service Profiles
A Quality of Service (QoS) profile defines the relative priority of an IP packet when multiple
connections are scheduled for simultaneous transmission on the VPN firewall. A QoS profile
becomes active only when it is associated with a nonblocking inbound or outbound firewall
rule or service, and traffic matching the firewall rule or service is processed by the VPN
firewall. Priorities are defined by the Type of Service in the Internet Protocol Suite standards,
RFC 1349.
You can assign a QoS profile to a firewall rule or service on the follo
wing screens:
• Add LAN WAN Outbound Services screen for IPv4
• Add LAN WAN Outbound Services screen for IPv6
• Add DMZ WAN Outbound Services screen for IPv4

NETGEAR FVS318G Specifications

General

Power requirements	12V DC, 1.5A
Firewall throughput	250 Mbit/s
Maximum data transfer rate	1000 Mbit/s
HTTP performance	6000 transactions/sec
Wi-Fi	No
DHCP server	Yes
Number of VLANs	256
VPN tunnels quantity	12
WAN connection	Ethernet (RJ-45)
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	9
Ethernet DMZ ports quantity	1
Routing protocols	RIP-1, RIP-2
Supported network protocols	TCP/IP, UDP, ICMP, PPPoE
VPN support	IPsec (ESP), IKE, PKI, HTTPS
Security algorithms	128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, MD5, SHA-1
Internal memory	128 MB
Flash memory	32 MB
Storage media type	Flash
Processor frequency	300 MHz
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Cables included	LAN (RJ-45)

Weight and Dimensions

Weight	590 g
Dimensions (WxDxH)	190 x 125 x 35 mm