Firewall Protection
141
NETGEAR ProSAFE VPN Firewall FVS318G v2
6. Click the Apply button.
Your changes are saved.
Create LAN WAN Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you did not define any
rules, no rules are listed. By default, all inbound traffic (from the Internet to the LAN) is
blocked. Remember that allowing inbound services opens potential security holes in your
firewall. Enable only those ports that are necessary for your network.
Make sure that you understand the consequences of a LAN WAN
inbound rule before you apply the rule. Incorrect configuration
might cause serious connection problems. If you are configuring
the VPN firewall from a remote connection, you might be locked
out.
IPv4 LAN WAN Inbound Service Rules
To create an IPv4 LAN WAN inbound rule:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Security
>
Firewall.
The LAN WAN Rules screen displays. In the upper right of the LAN WA
N Rules screen,
the IPv4 radio button is selected by default. The screen displays the IPv4 settings.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
